|
|
Designed to compete directly with the Galaxy-Viagra
board. Gives 3 band coverage but also has a +10kc switch to get those
"A" channels the Viagra kit doesn't! Unlike the Viagra kit, it uses the PLL to obtain the additional frequencies therefore eliminating all of
the problems with the Viagra board. All bands use one clarifier circuit
and forget about adjusting 6 coils to get all modes on frequency on Hi
and Lo bands! The PLL circuit locks in those channels and modes just as
it does for the regular CB channels! Yet, it retains the ability to
upgrade. (mod clarifier for TX/RX and expand)
On the Galaxy radio's, it can use the NB/ANL switch. For the Galaxy
2547, 939 or 959-DX but will fit any radio with the same board. Such as
the Ranger Freedom-One TR696, 936, 966, 969 and the Texas Ranger 396.
Simply change the crystal X3 with the one in the kit, unplug the NB/ANL
or TONE switch and plug it into the board. (we also like to jumper the
NB/ANL jack pins 1+3 so that the NB/ANL are on all the time) Then unplug the channel
selector cable and plug into the LC35, plug the LC35's cable into the
main board. You're done!! Perform a complete synthesizer alignment and
your all set. No more center frequency shifts when you
change bands because the switching is done in the PLL, not with
band crystals.
The Microprocessor has a built in oscillator so changes happen lightning
fast.
This is the Kit we install in many radios on our site. (Mostly
Galaxy CB radios)
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
|
|
