|
These mounts were specifically designed to allow antenna installations on vehicles where other mounts may not work.
The primary goal was to offer a mount that could be affixed to a vertical inner door jamb such as that which might
be found on the rear or side door of a cargo type van. Since the mounting screws are meant to be on the inner edge
of the jamb, visible holes in the vehicle body are eliminated. Chances are, you will find several locations to mount it on your vehicle. For antennas
up to 4ft in length.
The SS-204 includes our K-4 antenna stud mount. Accordingly, it is fully compatible with coax cables that are
terminated with ring terminal connections or those that are unprocessed at the mount end. In case of the later,
we do supply all of the required ring terminals with this mount.
In order to give you many years of trouble free
use, the bracket parts and mounting hardware are made of stainless steel. The
bracket is 1.5" (38mm) wide and has a 2" (50mm) reach for mounting inside the
door jamb. Overall, the mount is 4.2" (105mm) long. In order to compensate for
the door jamb angles, the stud bracket will swivel a full 180 degrees, 90 in
each direction. This adjustment feature will let you mount the antenna on either
the left or right side of the vehicle.
|
Chat
