|
Optional
Accessories |
|
|
Tune-up.
Perform a
tune-up to radio to increase power, audio and performance.
|
$29 |
|
|
NEW MOSFET Final.
(perform a
tune-up to radio to increase power, audio and performance
and replace the bipolar transistor final with a higher power
MOSFET) |
$59 |
|
|
Perform
Receiver improvement mods.
(These mods
replace key RX parts for better sensitivity and selectivity) |
$26 |
|
|
 RFX-95HD2.
Install a completely new final
section consisting of a high power MOSFET and perform a
tune-up to the entire radio to increase power, audio and performance
with an AM carrier
of 15 watts with 90+ watts peak power.. Amp
on/off switch in the back. (or the Tone
switch by request) |
$189 |
|
|
Change
factory power cord
to a 10 Gauge
Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 3300uF Capacitor is also added for additional DC filtering. This is only helpful when
you have the RFX-95HD2 and is NOT required for a stock radio
    |
$59 |
|
|
 FAN KIT Installed Install TWO- 40 x 40 x 20mm Black Fans with a switch for on/off combined with the amp on/off switch.I
use also a relay isolated low noise power input system. |
$79 |
|
|
Low Dead Key (carrier).
(perform a tune-up to radio
to increase peak power with loud audio a lower carrier (dead
key). This is perfect to match many amplifier types. |
$49
or
$59 |
|
|
VARIABLE POWER Install a power
regulator / super modulator circuit and a new variable
rear
control. Perform a tune-up
to the radio. Increased peak power and audio performance.
Smooth Variable AM carrier from 1/2w to
5 watts
variable. |
$79 |
 |
Turner
RK-56
Noise Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$46 |
 |
Astatic
636L Noise
Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$29 |
|
|
Install an Echo Board
(Side)
(wired internal to the radio with
dual controls on the left side to control speed and echo
effects) |
$65
or
$75 |
|
|
Install
a
Noise toy
(wired inside the radio with
a switch or pushbutton to trigger any 30 second sound byte
you want) |
$65 |
|
|
Install
a
Noise toy as a background theme music
(wired inside the radio with
a switch to play any background music at very low volume so
you can talk over it.) |
$65 |
|
|
Install a
Roger Beep Module
(wired inside the radio using
the CH9 switch for on/off) |
$79 |
|
|
Install a
Record/Playback Module 120 seconds
(wired inside the radio with
a switch on the side to record 120 seconds and to play it back) |
$77 |
 |
Add
a
Small External Speaker
(plugs into back of the
radio for improved sound) |
$12 |
 |
Add
a
Large External Speaker
(plugs into back of the
radio for improved sound) |
$25 |
 |
Exchange
the top and bottom
covers
to
Chrome Covers. |
$32 |
 |
Exchange
the top and bottom
covers
to
Diamond Plate
Covers. |
$22 |
 |
K-Link
Radio Supports makes for a great Table top base station |
$25 |
Chat
