Cobra 29 LXBT

Optional Accessories

Tune-up. Perform a tune-up to radio to increase power, audio and performance. AM carrier 6 watts and 25-30 watts peak power.

$29

NEW MOSFET Final. (perform a tune-up to radio to increase power, audio and performance and replace the bipolar transistor final with a higher power MOSFET) AM carrier 6 watts and 38-45 watts peak power.

$59

RFX-95 Final. Install a completely new final section consisting of a high power MOSFET and perform a tune-up to the entire radio to increase power, audio and performance with an AM carrier of 20 watts with 90+ watts peak power. On/Off switch in the back.

$189

Change factory power cord to a 10 Gauge Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 3300uF Capacitor is also added for additional DC filtering. This is only helpful when you have the RFX-95HD2 and is NOT required for a stock radio

$59

FAN KIT Installed Install TWO- 40 x 40 x 20mm Black Fans with a switch for on/off combined with the amp on/off switch.I use also a relay isolated low noise power input system.

$79

Low Dead Key (carrier). (perform a tune-up to radio to increase peak power with loud audio a lower carrier (dead key). This is perfect to match many amplifier types.

$49
or $59

VARIABLE POWER Install a power regulator / super modulator circuit and a new variable rear control. Perform a tune-up to the radio. Increased peak power and audio performance. Smooth Variable AM carrier from 1/2w to 6 watts variable.

$79

Perform Receiver improvement mods.
(These mods replace key RX parts for better sensitivity and selectivity)

$26

Install a Lescomm 120 Channel Frequency Kit
(This mod adds a 3 position switch to the left side of the radio to access 120 channels) Tune-up Included.

$129

Install an Echo Board. (Side)
(wired internal to the radio with dual controls on the left side to control speed and echBoardo effects)

$65
or
$75

Install an Echo Board. (FRONT)
(wired internal to the radio with dual control pot that is Cobra part so fits in the front. Matching factory knobs also used.

$85
or
$95

Install a Noise toy
(wired inside the radio with a switch or pushbutton to trigger any 30 second sound byte you want)

$65

Install a Noise toy as a background theme music
(wired inside the radio with a switch to play any background music at very low volume so you can talk over it.)

$65

Install a Record/Playback Module 120 seconds (wired inside the radio with a switch on the side to record 120 seconds and to play it back)

$77

Install a Roger Beep Module (wired inside the radio using a witch in the back for on/off)

$79

Add a Small External Speaker
(plugs into back of the radio for improved sound)

$12

Add a Large External Speaker
(plugs into back of the radio for improved sound)

$25

Install Star Brite Knobs with dimmer control. Includes a 6 Knob set , parts and labor.

$154

Exchange the top and bottom covers to Chrome Covers.

$25

Exchange the top and bottom covers to Diamond Plate Covers.

$22