SS-34AM
Medium Duty "SS" Spring & Stud Mount

*** Unavailable ***

Also Available with ring terminal

           These springs are made of stainless steel for many years of service. Two basic models (ring terminal connections and screw-on connection), each available in a medium duty model and in a heavy duty model, are available. Each spring stands about 3 inches (77mm) above the mount surface.

     The medium duty models are great for 2 ft heavy fiberglass antennas as well as 3ft light duty fiberglass antennas.

     The screw-on connector models (SS-34AM & SS-34AH) utilize our premium SO-239 base design. The strength and performance of this design has made it the standard by which all other similar designs are judged by. As expected, the hardware on these models is stainless steel and all insulators are molded in nylon.

• SS-34M  -  ring terminal medium duty
• SS-34H  -  ring terminal heavy duty
• SS-34AM  -  screw-on S0-239 medium duty
• SS-34AH  -  screw-on S0-239 heavy duty

UNAVAILABLE

"The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feed line. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end up with unneeded loss. And if that isn't enough, the stud mount must be strong enough to withstand all of the stress placed upon it from an antenna that is subject to severe wind load and vibration."

2 Year Warranty