|
Optional
Accessories |
|
|
Tune-up.
Perform a
tune-up to radio to increase power, audio and performance. |
$29 |
|
|
NEW MOSFET Final.
(perform a
tune-up to radio to increase power, audio and performance
and replace the bipolar transistor final with a higher power
MOSFET) |
$59 |
|
|
  RFX-95HD2.
Install a completely new final
section consisting of a high power MOSFET and perform a
tune-up to the entire radio to increase power, audio and performance
with an AM carrier
of 15 watts with 90+ watts peak power.
On/Off switch on the CH-9 switch
in front. |
$189 |
|
|
Change
factory power cord
to a 10 Gauge
Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 3300uF Capacitor is also added for additional DC filtering. This is
only helpful when
you have the RFX-95HD2 and is NOT required for a stock radio
    |
$59 |
|
|
 FAN KIT Installed Install TWO- 40 x 40 x 20mm Black Fans with a switch for on/off combined with the amp on/off switch.I
use also a relay isolated low noise power input system. |
$79 |
|
|
Low Dead Key (carrier).
(perform a tune-up to radio
to increase peak power with loud audio a lower carrier (dead
key). This is perfect to match many amplifier types. |
$49
or
$59 |
|
|
 VARIABLE POWER Install a power
regulator / super modulator circuit and a front
panel control installed in the delta tune location. Smooth Variable AM carrier from 1/2w
to 5 watts.
Includes
a full Tune and Alignment to the radio. |
$79 |
|
|
Perform
Receiver improvement mods.
(These mods
replace key RX parts for better sensitivity and selectivity) |
$26 |
 |
Turner
RK-56
Noise Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$46 |
 |
Astatic 636L Noise Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$29 |
|
|
 Install
an Echo Board
(Front Delta Tune location)
Wired internal to the radio with
dual controls in the front to control speed and echo
effects) |
$65
or
$75 |
|
|
Install Talkback Wired inside the radio so that
when you talk you can hear yourself. If you chose an Echo or
a Recorder mod, I highly suggest this as well. |
$10
or
$15
or
$20 |
|
|
Install
a
Noise toy
Wired inside the radio with
a switch or pushbutton to trigger any 30 second sound byte
you want. |
$65 |
|
|
Install
a
Noise toy as a background theme music
Wired inside the radio with
a switch to play any background music at very low volume so
you can talk over it. |
$65 |
|
|
Install a
Record/Playback Module
Wired inside the radio with
two pushbuttons on the side to record 120 seconds and to play it back. |
$77 |
|
|
Install a
Roger Beep Module
(wired inside the radio using
the CH9 switch for on/off) |
$79 |
 |
Add
a
Small External Speaker
(plugs into back of the
radio for improved sound) |
$12 |
 |
Add
a
Large External Speaker
(plugs into back of the
radio for improved sound) |
$25 |
|
|
 Install
Star Brite Knobs
with dimmer control. Includes a 6 Knob set
, parts and labor. |
$202 |
|
|
 Install
Star-Bryte Rings behind the factory
knobs with dimmer control
circuit integrated into the radios dimmer. Includes 6
LED Rings , dimmer, parts and labor. |
$154 |
 |
Exchange
the top and bottom
covers
to
Chrome Covers. |
$32 |
 |
Exchange
the top and bottom
covers
to
Diamond Plate
Covers. |
$22 |
 |
K-Link
Radio Supports makes for a great Table top base station |
$25 |
Chat
