Optional
Accessories |
|
Tune-up.
Perform a
tune-up to radio to increase power, audio and performance.
AM carrier 6 watts and 25-30 watts peak power. |
$29 |
|
NEW MOSFET Final.
(perform a
tune-up to radio to increase power, audio and performance
and replace the bipolar transistor final with a higher power
MOSFET) AM carrier 6 watts and 38-45 watts peak power. |
$59 |
|
VARIABLE POWER Install a power
regulator / super modulator circuit and a new variable front
panel control. Installed in the delta tune location. perform
a tune-up to the radio. Increased peak power and audio
performance. Smooth Variable AM carrier from 1/2w
to 6 watts
variable. |
$79 |
|
RFX-95
Final.
Install a completely new final
section consisting of a high power MOSFET and perform a
tune-up to the entire radio to increase power, audio and performance
with an AM carrier
of 20 watts with 90+ watts peak power.. On/Off switch in the
back. |
$189 |
|
Change
factory power cord
to a 10 Gauge
Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 3300uF Capacitor is also added for additional DC filtering. This is only helpful when
you have the RFX-95HD2 and is NOT required for a stock radio
|
$59 |
|
FAN KIT Installed Install TWO- 40 x 40 x 20mm Black Fans with a switch for on/off combined with the amp on/off switch.I
use also a relay isolated low noise power input system. |
$79 |
|
Perform
Receiver improvement mods.
(These mods
replace key RX parts for better sensitivity and selectivity) |
$26 |
|
Install
a Lescomm 120 Channel Frequency Kit
(This mod adds a 3
position switch to the left side of the radio to
access 120 channels) Tune-up Included. |
$129 |
|
Turner
RK-56
Noise Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$46 |
|
Astatic
636L Noise
Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$29 |
|
Install
an
Echo Board.
(Front
Dimmer location)
(wired internal to the radio with
dual controls in the front to control speed and echo
effects) |
$65
or $75 |
|
Install
an
Echo Board(Side)
(wired internal to the radio with
dual controls on the left side to control speed and echo
effects) |
$65
or $75 |
|
Install
a
Noise toy
(wired inside the radio with
a switch or pushbutton to trigger any 30 second sound byte
you want) |
$65 |
|
Install
a
Noise toy as a background theme music
(wired inside the radio with
a switch to play any background music at very low volume so
you can talk over it.) |
$65 |
|
Install a
Roger Beep Module
(wired inside the radio using a switch
in the back for on/off) |
$79 |
|
Install a
Record/Playback Module 120 seconds
(wired inside the radio with
two pushbuttons on the side to record 120 seconds and to play it back) |
$77 |
|
Add
a
Small External Speaker
(plugs into back of the
radio for improved sound) |
$12 |
|
Add
a
Large External Speaker
(plugs into back of the
radio for improved sound) |
$25 |
|
Exchange
the top and bottom
covers
to
Chrome Covers. |
$32 |
|
Exchange
the top and bottom
covers
to
Diamond Plate
Covers. |
$22 |
|
K-Link
Radio Supports makes for a great Table top base station |
$25 |