Optional
Accessories |
Selected Above |
Tune-up and frequency
conversion.
(Tune-up, Alignment and
expanded frequency coverage) |
$49 |
|
Astatic
636L Noise
Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$29 |
|
Turner
RK-56
Noise Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$46 |
|
Astatic
RD104-E Amplified microphone.
(wired for this radio with a 4
pin plug and a battery installed) |
$46 |
|
Install
High Pass Filter Switch
(wired to tone control location
inside the radio to cut the high frequency (hiss) sound to a
lower tone. Much easier to listen to, I wouldn't own a
Ranger without this mod.) |
$15 or $20 |
|
Install
an
EXTERNAL amplifier keying port.
or PTT OUT. We
use an RCA jack in the back for a TX output PORT to your external
device. Every time you key it provides a connection between
the +/- of the RCA connector.
1) Output RCA completely isolated from the radio. +/-
of RCA
connects to a relay that isolates it from the radios
circuits.
2) Optional BYPASS switch in
case your external device does not have one. (turns port off
(stays open))
3) Works
all the time in high or low power modes..
4) Heavy duty relay can handle any keying circuit voltage,
even the SB-220's - 120VDC circuit. |
$49
/
$59
/
$69 |
|
Install a
Record/Playback Module 120 seconds
(wired inside the radio with
two pushbuttons on the side to record 120 seconds and to play it back) |
$77 |
|
Install a
Noise toy
(wired inside the radio with a
switch or pushbutton to trigger any 30 second sound byte you
want) Put a link to your sound byte in the box. |
$65 |
|
Add a
Small External Speaker
(plugs into back of the radio
for improved sound) |
$12 |
|
Add a
Large External Speaker
(plugs into back of the radio
for improved sound) |
$25 |
|
We
will extend the short power cord (1 foot) to a full 10
feet with HQ 8 Gauge Power wire. Assemble the
OEM Anderson connector and fuse holder to make a complete
power cord (with ends).*** THIS IS SOLD WITH RADIO ONLY *** |
$25 |
|
COMPLETE
8G Power cord for second vehicle or location using a new
Anderson
and New fuse holder. |
$38 |
|
DC Cord for the Super over-killer,
using a new radio sized
Anderson
connector,
Heavy duty
AGU
Fused at 60A with
4
gauge wire (12 feet) and brass Lugs for the battery.
|
$89 |
|
K-Link K-630 Brackets: Sturdy Table
top stands will make your longhorn into a base in no time. |
$28 |