DX 66V3

Optional Accessories

Tune-up and frequency conversion.
(Tune-up, Alignment and expanded frequency
coverage) (AM/FM: 1-10w, Peak AM: 13-45w)

$39

Perform Receiver improvement mods.
(These mods replace key RX parts and RX alignment for better sensitivity and selectivity)

$26

Turner RK-56 Noise Canceling microphone. (wired for this radio with a 4 pin plug)

$46

Astatic 636L Noise Canceling microphone. (wired for this radio with a 4 pin plug)

$29

Astatic RD104-E Amplified microphone.
(wired for this radio with a 4 pin plug and a battery installed)

$39

EC2018XTR Xtreme Echo microphone.
(wired for this radio with a 4 pin plug and a battery installed)

$79

Install a Record/Playback Module 18 seconds (wired inside the radio with a switch on the side to record 18 seconds and to play it back)

$77

Install a Noise toy.
(wired inside the radio with a switch or pushbutton to trigger any 18 second sound byte you want)

$65

Install a Noise toy as a background theme music (wired inside the radio with a switch to play any background music at very low volume so you can talk over it.)

$65

Install Star-Bryte Knobs with dimmer control. Includes a 6 Knob set , parts and labor.

$169

Add a Small External Speaker
(plugs into back of the radio for improved sound)

$12

Add a Large External Speaker
(plugs into back of the radio for improved sound)

$25

The item most overlooked when ordering a custom radio is the microphone. Your new radio will NOT sound great with a stock mic on it even if you have it tuned. If your CB is more than a tool for work, you NEED to upgrade your microphone.
My personal favorites are the Astatic 636L and RD104E.