|
Optional
Accessories |
|
|
Tune-up.
Perform a
tune-up to radio to increase power, audio and performance. |
$29 |
|
|
NEW MOSFET Final.
(perform a
tune-up to radio to increase power, audio and performance
and replace the bipolar transistor final with a higher power
MOSFET) AM carrier 6 watts and 38-45 watts peak power. |
$59 |
|
|
 RFX-95
Final.
Install a completely new final
section consisting of a high power MOSFET and perform a
tune-up to the entire radio to increase power, audio and performance
with an AM carrier
of 20 watts with 90+ watts peak power.. On/Off switch in the
back. |
$189 |
|
|
Change
factory power cord
to a 10 Gauge
Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 10,000uF Capacitor is also added for additional DC filtering. This is only helpful when
you have the RFX-95HD2 and is NOT required for a stock radio
    |
$59 |
|
|
 FAN KIT Installed Install TWO- 40 x 40 x 20mm Black Fans with a switch for on/off combined with the amp on/off switch.I
use also a relay isolated low noise power input system. |
$79 |
|
|
Low Dead Key (carrier).
(perform a tune-up to radio
to increase peak power with loud audio a lower carrier (dead
key). This is perfect to match many amplifier types. |
$49 |
|
|
VARIABLE POWER Install a power regulator
/ super modulator circuit and a new variable front panel
control. Installed in the dimmer location. Perform a
tune-up to the radio. Increased peak power and audio
performance. Smooth Variable AM carrier from 1/2w to 6 watts
variable. |
$79 |
|
|
Perform
Receiver improvement mods.
(These mods
replace key RX parts for better sensitivity and selectivity) |
$26 |
|
|
Install
a Lescomm 120 Channel Frequency Kit (This mod adds a 3
position switch to the left side of the radio to
access 120 channels) Tune-up Included. |
$129 |
|
|
Turner
RK-56
Noise Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$46 |
|
|
Astatic
636L Noise
Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$29 |
|
|
Install
an
Echo Board.
(Front
Dimmer location)
(wired internal to the radio with
dual controls in the front to control speed and echo
effects) |
$65
or
$75 |
|
|
Install
an
Echo board. (Side)
(wired internal to the radio with
dual controls on the left side to control speed and echo
effects) |
$65
or
$75 |
|
|
Install
Talkback
(wired inside the radio so that
when you talk you can hear yourself. If you chose an Echo or
a Recorder mod, I highly suggest this as well) |
$10
or
$15 |
|
|
Install
a
Noise toy
(wired inside the radio with
a switch or pushbutton to trigger any 30 second sound byte
you want) |
$65 |
|
|
Install
a
Noise toy as a background theme music
(wired inside the radio with
a switch to play any background music at very low volume so
you can talk over it.) |
$65 |
|
|
Install a
Record/Playback Module 120 seconds
(wired inside the radio with
a three way switch on the side to record 120 seconds and to play it back) |
$77 |
|
|
Install a
Roger Beep Module
(wired inside the radio using
the TONE switch for on/off) |
$79 |
|
|
Add
a
Small External Speaker
(plugs into back of the
radio for improved sound) |
$12 |
|
|
Add
a
Large External Speaker
(plugs into back of the
radio for improved sound) |
$25 |
|
|
Install
Star Brite Knobs
with dimmer control. Includes a 6 Knob set
, parts and labor. |
$154 |
|
|
Exchange the top and bottom covers to
Chrome Covers. |
$25 |
|
|
Exchange the top and bottom covers to
Diamond Plate
Covers. |
$22 |
|
|
 K-Link
Radio Supports makes for a great Table top base station |
$25 |
Chat
